Enviroguard Corporation Job Estimator — Remediation & Waterproofing

Enviroguard Job Estimator

Estimate two ways. By system — complete good/better/best protocols for mold, foundation waterproofing, pet & animal, and REACT|EXTRACT™ fire, water, and sewage remediation. Or by single product — price any one product from the full Enviroguard catalog on its own. Both build up material quantities, labor, and a margin-checked price, and both feed the Total Estimate where you and the customer toggle services live.

Step 1 — Assign the Severity Index™
Step 1 — Match the Membrane to the Assessment
Step 1 — Select Roof Surface to Restore
Step 1 — Select Service Tier to Estimate
Step 1 — Select Service Tier to Estimate Fire & Smoke
Step 2 — Job Dimensions & Rates
Area & Volume
board ft
Framing, sheathing, subfloor, joists, walls. 1 board foot ≈ 1 sq ft of treated surface. Drives cleaning & coating chemistry.
cu ft
Floor area × ceiling height. Doses Dutrion ClO₂ dry fumigation (PPM per cubic foot).
Wall Area
sq ft
Measure length × height of all walls to be treated. Typical 1,000 sq ft basement ≈ 800–1,000 sq ft of wall.
Surface Preparation — Substrate & Efflorescence
Ordered at the porous end of the field-guide expected-consumption band. Friable block — assess suitability before proceeding.
pHaragent neutralization (1:16) is included automatically on every NeatCrete wall.
Field-guide Stage 3B: primes green concrete over the full wall square footage (after EnviroSeal, before the coating). Only on concrete under one year.
Surface-Prep Rates & Markups
$/hr
Incl. profit.
hrs
%
%
$ cost
%
Waterproofing Membrane — Detailing
lin ft
Cold joints, cracks, penetrations, cove joint. Estimate 30–50 LF for typical residential basement.
cracks
Each crack adds ~0.25 hr for V-groove + hydraulic cement repair.
Membrane Rates & Markups
$/hr
Incl. profit.
hrs
%
%
$ cost
%
Roof Area & Detailing
sq ft
Drives cleaner, primer (metal), Base Coat (100 ft²/gal) and Top Coat (66 ft²/gal).
lin ft
Fasteners, seams, penetrations, flashings sealed with Fastener & Seam before base coat.
Pick the spray-tip width and build that matches the detail work. 6″ builds a gasket over fasteners; 12″ bonds seams.
Broadcast into the top coat for walkable slip resistance — an encouraged safety add-on.
Scope & Severity
sq ft
Treat the contamination extent, not just the visible stain — urine wicks well beyond what is visible.
Drives CleanZyme volume, dwell time, and labor. Higher severity = more product and more treatments.
Adds Dutrion vapor dosing for cavities and flags VaporLock encapsulation (Tier 3).
Scope & Severity
sq ft
All structural surfaces to REACT|EXTRACT™ — framing, sheathing, subfloor, walls. Soot, water, or biohazard wicks past the visible line.
Painted surfaces
PreClean
✓ VaporLock sealable
sq ft
Structural framing
REACT|EXTRACT™ — OxyPrep + Grease Gobbler (50:50), neutralized with Oxypar
✓ VaporLock sealable
sq ft
Masonry — foundation walls, brick, CMU block
Pressure wash with Grease Gobbler
✓ VaporLock sealable
sq ft
Textiles, furniture, cabinets, finished wood & fragile contents
Code Orange
✕ Never seal with VaporLock
sq ft
Total treated area: 500 sq ft
Sets cleaner coverage by load (300 / 200 / 100–150 ft²/gal) and labor. REACT|EXTRACT™ still saves 60–70% labor vs. hand-scrubbing.
Adds an extra Dutrion ClO₂ dosing pass for cavities and framing where liquids can’t reach.
ft
Dutrion ClO₂ is dosed by volume (area × height). Each 525 g kit makes 50,000 ppm, applied at 4/6/8 ppm per ft³ for light/moderate/heavy odor.
Rates & Markups
$/hr
All-in rate billed per crew-hour — includes contractor profit. No separate job margin is added.
hrs
Leave blank to auto-calculate. Enter a value to override with your own production rate.
%
Markup over your product cost. 25–40% is typical for specialty coatings.
$ cost
Your cost of job consumables. Marked up below.
%
%
Added to material quantities. 10–15% is standard.
Corrosion Control — ShineOn Coverage
%
Counts steel framing, iron railings, copper flashing, steel door frames, HVAC coils, electrical panels, piping, fire-sprinkler pipes, motor housings, hinges, locks, plumbing fixtures & appliances. ShineOn covers 75 ft²/qt (300 ft²/gal).
Step 3 — Build the Scope (checked items match the recommended scope for the selected Severity Index — adjust à la carte)
CleanLimpiar
Every service begins here. Remove the soil load and staining.
SanitizeDesinfectar
Once clean, reduce spores & microbials. Wet or dry.
ControlControlar
Recurrence prevention — the final IICRC step. Passive moisture controls.
Step 1 — Pick a Product & Enter the Job
Product
Every Enviroguard product, grouped by category. Coverage & cost are editable below.
sq ft
Quantity is converted to product units using the coverage rate.
Choose the pack the customer prefers. OxyPrep & SuperPar switch automatically under the Limited Quantities rule.
Fastener & Seam Sealer is measured in linear feet by the path width you apply.
ft
Dutrion fumigation is dosed by volume (area × height).
Each 525 g kit makes 50,000 ppm of ClO₂.
Coverage scales with load: 300 / 200 / 100 ft²/gal.
°F
Dose scales with how far below 32 °F you are.
Rates & Markups
$/hr
Includes contractor profit.
hrs
Blank = auto from area × the product’s application rate.
%
$ cost
%
%
Update each product’s pail/kit cost and coverage as Enviroguard pricing changes. Values save in this browser and carry over the next time you open the tool on this device. Confirm current contractor pricing at enviroguarddirect.com.

Estimate Results

Total Job Price
—
—
Labor (incl. profit)
—
—
Materials + Consumables
—
billed with markup
Material Quantities & Cost
ProductQtyUnitCost
Product costs & coverage are editable defaults based on published pail/case figures. Confirm current contractor pricing at enviroguarddirect.com (login required).
Labor Hours
Price Breakdown
Severity Index™ — Customer Presentation View
MSI-1
Elevated Spores
Condition 2 · Sanitize & Control
—
—
Dry fumigation (sanitize) — control optional
MSI-2
Light Surface Mold
Condition 3 · Clean + Control
—
—
Oxypar LR + Botanical + prevention
MSI-3–5
Embedded / Pigmented
Condition 3 · Full Service
—
—
REACT|EXTRACT + fumigation + prevention
Index first, then build. The Severity Index sets the customer’s expectation before price does. Show where their environment falls, what the recommended scope is, and what the Control step protects — property value, non-disclosure liability, and their negotiating position at resale.
Matched to the Assessment — Customer Presentation View
System 1 · MasonryGuard
Capillary & condensation damp
20–30 PSI · hairline cracks · interior, no excavation
—
— per sq ft
System 2 · Phoenix Interior
Active / chronic seepage
40–60 PSI · dynamic cracks 1/16–1/8″ · interior, no excavation
—
— per sq ft
System 3 · Phoenix Exterior
High sustained head
100–250+ PSI · cracks 1/4″+ · exterior, excavation
—
— per sq ft
Qualify, don’t upsell. Match the membrane to what the assessment found — the type of moisture and cracking, and the hydrostatic pressure the wall has to resist. Damp, low-pressure walls with hairline cracks qualify for MasonryGuard; active seepage with moving cracks calls for the Phoenix interior membrane; high sustained head or new construction with full exterior access is Phoenix exterior territory. The right answer is the one that matches the conditions on the wall.
Roof Restoration — Customer Presentation View
Standard System
—
Clean · Fastener & Seam · WhiteCap Base + Top
—
— per sq ft
+ Anti-Slip Surface
—
Standard system + 3M anti-slip granules
—
— per sq ft
Lead with safety. The anti-slip granule surface is an inexpensive upgrade that makes the finished roof walkable and reduces fall risk during future service — an easy yes for facility managers responsible for worker safety.
Good · Better · Best — Customer Presentation View
Good · Tier 1
Surface Treatment
Stages 1–2 · Enzymatic + Oxidative
—
— per sq ft
Better · Tier 2
Full Remediation
Stages 1–3 · adds Dutrion ClO₂
—
— per sq ft
Best · Tier 3
Remediation + Odor Seal
Stages 1–4 · adds VaporLock
—
— per sq ft
Presenting all three options: Let severity drive the recommendation, not budget. Light/fresh contamination is genuinely Tier 1 work. Once odor is humidity-responsive or has soaked into subfloor, structural materials, or concrete, Tier 3 is the honest answer — sealing without the prior stages traps the problem.
Good · Better · Best — Customer Presentation View
Good · Tier 1
—
—
—
— per sq ft
Better · Tier 2
—
—
—
— per sq ft
Best · Tier 3
—
—
—
— per sq ft
REACT|EXTRACT™ is the backbone. All three tiers clean by source removal (OxyPrep → booster → Oxypar LR) — 60–70% less labor than hand-scrubbing. The tiers add odor destruction and encapsulation. Let severity and porosity drive the recommendation.
Selling This Level — Key Points

Total Estimate

Every estimate you add appears here as itemized services. Toggle the checkboxes with the customer and the total updates live — only checked services print on the customer copy. Add more from the System or Product tabs.

Estimate
No estimates added yet. Build an estimate on the Mold or Foundation tab, then click “+ Add to Total Estimate.”
Total Estimate
$0
Each line is independently priced and can be checked on or off, so the customer can accept any combination. Foundation Surface Prep and the Membrane are separate lines — quote either or both — but the Phoenix membrane sequence itself (Bridging & Joint Compound → Foundation Base Coat → Foundation Waterproofer) is sold as one unit. Saved estimates persist on this device.
Customer Financing — Estimate Monthly Payments

Show the customer flexible monthly-payment options for this job through Wisetack. Enter a job total to preview terms — no impact to their credit to check.